Basic Guide to Laying Underfloor Heating Pipes
In the cold winter months, if you are not keen on having to tiptoe on the cold floor, then installing underfloor heating is a great choice. There is nothing quite like the warmth and luxury of underfloor heating and those who have experienced it, will not want to miss it. If you too are planning to install underfloor heating in your home, and have settled on water-based underfloor heating, then apart from choosing the right pipes for the installation, you must also keep in mind the proper procedure. Take a read at this basic guide for the installation of wet underfloor heating:
1. Before beginning the installation of the system, check the compatibility of the wet underfloor system with the flooring you have or intend to install. Water underfloor heating systems are not compatible with most solid wooden flooring, felt, and certain types of tile flooring.
2. Also make sure you have all the appropriate materials. The best underfloor heating pipe must be chosen to ensure that the system is secure. Additionally, pipe fittings, controls and thermostats, manifolds and flooring systems must be chosen and collected in the place where the installation is to be made.
3. Insulation for the installation of the wet underfloor heating pipes must be duly laid before the pipes are laid. The insulation must be such that the heat only radiates upwards and does not escape downwards, causing loss of heat and energy.
4. Once the insulation has been laid, the hot water connection pipe must be placed at a suitable depth. There must be adequate space between the pipes to ensure more even heating distribution. Thereafter, it must be connected to the manifold.
5. The pipes must be connected to the insulation using the proper staples. This will prevent the pipes from slipping and will allow the heat to radiate properly towards the floor.
6. Once the pipes are laid, the screed must be prepared and poured over the secured pipe system. The screed must then be allowed to stabilize for the specified time.
7. After the screed has settled, the flooring must be installed. This completes the installation.
For energy-efficient and cost-effective wet underfloor heating, explore the advanced solutions from Wavin, the leading global manufacturer of sustainable pipes and fittings. Wavin offers he best-in-class range of underfloor heating components for seamless installations.
4. Once the insulation has been laid, the hot water connection pipe must be placed at a suitable depth. There must be adequate space between the pipes to ensure more even heating distribution. Thereafter, it must be connected to the manifold.
5. The pipes must be connected to the insulation using the proper staples. This will prevent the pipes from slipping and will allow the heat to radiate properly towards the floor.
6. Once the pipes are laid, the screed must be prepared and poured over the secured pipe system. The screed must then be allowed to stabilize for the specified time.
7. After the screed has settled, the flooring must be installed. This completes the installation.
For energy-efficient and cost-effective wet underfloor heating, explore the advanced solutions from Wavin, the leading global manufacturer of sustainable pipes and fittings. Wavin offers he best-in-class range of underfloor heating components for seamless installations.
Comments
Post a Comment